For Sale: 1987 Buick Turbo T

Selling a BEAUTIFUL SHOW ROOM QUALITY 1987 Buick Turbo T factory color combination grey and silver (very rare) factory sunroof  which makes this car even more unique! This car has been professionally built from the ground up, everything in this car has been gone through and no corners were cut short while building this project which has countless hours into it. This car was stripped down when it went out for paint, new weather strips all around (trunk, driver, and passanger side) MANY NEW PARTS AND LOTS OF CHOME! Clean title. This is a California car with not one bit of rust on it. The pictures don’t do any justice for this car. Well over $40k in this car. Dont let this one get away cause you'll never see another one as pristine as this car! It runs and rides as good as it looks!

Engine:
-Stock Stroke 3.400 crankshaft, stock connecting rods and TRW .030 over pistons.
-F.A.S.T computer system
-Mildly ported intake manifold and Cast Iron heads with 177/160 valves.
-Gn1performance 3inch down pipe
-Gn1performance KB-3 bolt headers with a 38mm wastegate off the header
-70mm Kenne Bell Throttle body and upper plenum
-73lb Injectors
-Gn1 Valve covers
-Stock rocker arms
-Isky Camshaft
-External transmission cooler
-Gn1performance Intercooler (all 2.5inch piping)
-Turbonetics 62mm Turbo, P-trim wheel, 63 a/r exhaust housing 4inch inlet
-ATR 2.5 inch stainless steel cat back exhaust system with cut out
-340 Walbro  fuel pump
-Hot wire kit
-3inch Aluminum High flow Radiator
-Dual Radiator Fans
-All a/c parts are on the car still

Drive train:
-Stock 10 bolt 8.5inch rear end with 3.73 gears
-Air Bags
-30 spline axles
-Art Carr 9inch 3400-3600 stall converter
-200R4 built with all hardened parts by Art Carr with Deep trans pan
-Mickey Thompson drag star wheels all around with 275-60-15 Mickey Thompson drag radials in the rear and 205-70-15 in the front

Interior/Exterior:
-Extremely clean ORIGINAL grey cloth interior
-Full Steel body car with no weight reduction

Price: $23,000

ARCHIE@GN1PERFORMANCE.COM

Please feel free to email us or call if you are interested in this car, we have many pictures of it!

This is a GN1Performance "200R4 BUILT TRANSMISSION READY TO GO" for a 1986 or 1987 Buick Grand National, T Type, Turbo T, or GNX 3.8 liter turbo V6.  Built with a shift kit, extra clutch pack and hardened shaft.

For price, shipping and deatails please give us a call. I have them in stock right now even though the site may say i dont.

This is a GN1Performance "3.5 INCH EXTERNAL WASTEGATE DOWN PIPE WITH A 46mm WASTEGATE" for a 1986 or 1987 Buick Grand National, T Type, Turbo T, or GNX 3.8 liter turbo V6.This is our all new 3.5" Inch External wastegate Downpipe constructed out of 304 stainless steel. It comes complete with a brand new 46mm wastegate, bolts, and gaskets. All tig welds and is built to clear headers. Please keep in mind that when ordering any external wastegate down pipe a boost controller is need to allow it to function properly and avoid any damage.

• Note-This pipe is also available with an 02 bung, please state if needed when purchasing.
• This item will not work on a lowered vehicle due to contact with the upper control arm.

This is a GN1Performance "3.5 INCH INCH FLAT FLANGE DOWN PIPE" for a 1986 or 1987 Buick Grand National, T Type, Turbo T, or GNX 3.8 liter turbo V6. This is our all new 3.5" Inch Flate Flange Downpipe constructed out of 304 stainless steel. All tig welds and is built to clear headers. 

• Note-This pipe is also available with an 02 bung, please state if needed when purchasing.
• This item will not work on a lowered vehicle due to contact with the upper control arm.

This is a GN1Performance "3.5 INCH V-BAND DOWN PIPE" for a 1986 or 1987 Buick Grand National, T Type, Turbo T, or GNX 3.8 liter turbo V6. This is our all new 3.5" Inch V-Band Flange Downpipe constructed out of 304 stainless steel. All tig welds and is built to clear headers.  

• Note-This pipe is also available with an 02 bung, please state if needed when purchasing.
• This item will not work on a lowered vehicle due to contact with the upper control arm.

This is a GN1Performance "3 INCH 38mm EXTERNAL WASTEGATE DOWN PIPE " for a 1986 or 1987 Buick Grand National, T Type, Turbo T, or GNX 3.8 liter turbo V6. This 3" Inch External Wastegate Down Pipe is constructed out of 304 stainless steel and comes with a 38mm custom wastegate. All tig welds and is built to clear headers. Please keep in mind that when ordering any external wastegate down pipe a boost controller is need to allow it to function properly and avoid any damage.        

• Note-This pipe is also available with an 02 bung, please state if needed when purchasing.
• This item will not work on a lowered vehicle due to contact with the upper control arm.

This is a GN1Performance "3 INCH 46mm EXTERNAL WASTEGATE DOWN PIPE " for a 1986 or 1987 Buick Grand National, T Type, Turbo T, or GNX 3.8 liter turbo V6. This 3" Inch External Wastegate Down Pipe is constructed out of 304 stainless steel and comes with a 46mm custom wastegate. All tig welds and is built to clear headers. Please keep in mind that when ordering any external wastegate down pipe a boost controller is need to allow it to function properly and avoid any damage. 

• Note-This pipe is also available with an 02 bung, please state if needed when purchasing.
• This item will not work on a lowered vehicle due to contact with the upper control arm.